CSP Community PBX
These are the List of Supported Phones! Please note that Not all supported phones are listed and this page is still under development.
Cisco
| Phone Model | Supported? | Notes |
|---|---|---|
| ATA XXX | NOT SUPPORTED | Does not work no matter what, if you are looking to put an ATA on CSP, we Recommend the SPA Series |
| 7900 Series | Supported | Requires SIP Firmware |
| Cisco IP Communicator | Supported | Requires SIP Firmware |
| CP-7811 | Supported | Full Support |
| CP-7821 | Supported | Full Support |
| CP-7832 | Supported | Full Support |
| CP-7841 | Supported | Full Support |
| CP-7861 | Supported | Full Support |
| CP-8811 | Supported | Full Support |
| CP-8825 | Supported | Full Support |
| CP-8831 | Supported | Full Support |
| CP-8832 | Supported | Full Support |
| CP-8841 | Supported | Full Support |
| CP-8845 | Supported | Full Support |
| CP-8851 | Supported | Full Support |
| CP-8861 | Supported | Full Support |
| CP-8865 | Supported | Full Support |
| CP-8875 | Supported | We recommend you put it on 3rd party mode, but both modes work |
| Cisco 6800 Series | Supported | These Phones are all 3PCC, These Phones require Manual Configuration by the end user and cannot be used with the CSP Self Care Portal |
| CP-78XX-3PCC | Supported | These Phones require Manual Configuration by the end user and cannot be used with the CSP Self Care Portal |
| CP-88XX-3PCC | Supported | These Phones require Manual Configuration by the end user and cannot be used with the CSP Self Care Portal |
| DP-98XX | Supported | We recommend you put it on 3rd party mode, but both modes work |
| DX-650 | Supported* | Limited Support: Contacts, and Speed dials are not working on this phone |
| SPAXXX IP Phones | Supported | These Phones require Manual configuration by the end user and cannot be used with the CSP Self Care Portal |
| SPAXXX ATAs | Supported | These ATAs require Manual configuration by the end user and cannot be used with the CSP Self Care Portal |
Mitel
| Phone Model | Supported? | Notes |
|---|---|---|
| 6900 Series | Supported | Requires to be Provisioned to CSP |
Only the 6900 Series was able to get tested, we are unsure about other Mitel Phones, but we will gladly test your phone for you
GrandStream
| Phone Model | Supported? | Notes |
|---|---|---|
| HT 801 | Supported | |
| HT 802 | Supported | |
| HT 812 | Supported | |
| HT 813 | Supported | |
| HT 818 | Supported | |
| HT 841 | Supported | |
| HT 881 | Supported | |
| GXV3480 | Supported | |
| GXV3470 | Supported | |
| GXV3450 | Supported | |
| GXV3380 | Supported | |
| GXV3370 | Supported | |
| GXV3350 | Supported |
90% of Granstream Phones Will Work with us. Even if it is not listed here.
Yealink
| Phone Model | Supported? | Notes |
|---|---|---|
| T53X | Supported | Use default firmware |
| T48X | Supported | Use default firmware. The UI should look skeuomorphic if you are on default firmware. |
| T41X | Supported | Use default firmware |
Most Yealink phones work with CSP, just make sure it is not running the Microsoft Teams Firmware, Verizon OneTalk firmware or any Custom Firmware, as those will not work.
Poly (formerly known as Polycom)
| Phone Model | Supported? | Notes |
|---|---|---|
| Polycom SoundPoint Series | Supported | If missing Firmware, point the Boot server to 68.180.38.252 with Trivial FTP |
| PolyCom VVX Series | Supported | If missing firmwasre, point the Boot server to 68.180.38.252 with Trivial FTP |
| Poly Edge Series | Supported |
Panasonic
| Phone Model | Supported? | Notes |
|---|---|---|
| BB-GT1540 | NOT SUPPORTED | JOIP doesnt exist anymore. It's gone. No-one knows how to use it with other providers. It's done for. No more. Dead. Useless. |